Hinge Bumper – Best 11/16″ x 3/4″ Door Bumpers with Countersink, Box of 250

Description

A hinge bumper is a small part that makes a big difference on any shed, barn, or gate door. Mounted where the door meets the frame, it cushions the door as it closes, stops it in the right spot, and keeps wood, paint, and hardware from banging together. Our hinge bumpers measure 11/16″ x 3/4″ and feature a countersink screw hole, so the screw head sits down inside the bumper for a clean, flush finish that won’t scratch or catch on the door. They’re sold in a bulk box of 250 for builders, contractors, and dealers.

Why Use Hinge Bumpers

Doors that slam shut or swing past their stopping point wear out faster. Over time, that repeated impact can dent wood, chip paint, loosen hinges, and knock the door out of alignment. A hinge bumper absorbs that contact and gives the door a soft, consistent stopping point every time.

• Cushions every close – Softens the contact between the door and the frame for quieter operation.
• Protects surfaces – Helps prevent dents, scuffs, and chipped paint where the door meets the frame or trim.
• Reduces wear on hardware – Less banging means less strain on hinges, latches, and screws over time.
• Consistent door stop – Gives the door the same stopping point every time it closes.

Countersink Screw Hole for a Clean Finish

Each bumper has a countersink screw hole. When you drive a flat-head screw into it, the head sits down inside the bumper instead of sticking out above it. That means the door contacts the bumper’s surface, not a metal screw head, so you get the full cushioning benefit with no scratching or rubbing. It also gives the installation a neat, professional look.

Compact 11/16″ x 3/4″ Size

At 11/16″ x 3/4″, these hinge bumpers are small enough to fit on narrow door frames, trim, and jambs without getting in the way, yet big enough to give the door a solid, dependable contact point. Their compact size makes them easy to place exactly where you need them.

Common Uses

Hinge bumpers are a handy piece of shed hardware, and they work well on all kinds of doors:

• Shed doors and storage building doors
• Barn doors and stall doors
• Garden gates and fence gates
• Cabinets, chests, and deck boxes
• Playhouses, coops, and outbuildings
• Any door where you want a quiet, cushioned stop

Shed builders often install a shed door bumper on every building they make, so a bulk supply keeps every door finished the same way.

Sold by the Box

Our hinge bumpers come in a box of 250. That’s ideal for shed manufacturers, barn builders, cabinet makers, contractors, and hardware dealers who need a steady supply. Buying by the box lowers your cost per bumper and makes sure you always have one ready for the next door.

Easy Installation

Close the door to its normal position and find the spot where it meets the frame or stop. Hold the hinge bumper in place, mark the screw location, and drill a small pilot hole to prevent splitting. Drive a flat-head screw through the countersink screw hole until the head sits down inside the bumper. Open and close the door a few times to check that it contacts the bumper evenly. Use fasteners suited to your material and outdoor conditions.

Simple Care Tips

• Check bumpers at the start of each season and replace any that are worn or missing
• Make sure the mounting screw is snug and still sits below the bumper’s surface
• Wipe away dirt and debris that can build up where the door closes
• Keep spare hinge bumpers on hand for quick replacements and new builds

The Finishing Touch for Every Door

Give your doors a quieter close and a longer life. Our 11/16″ x 3/4″ hinge bumpers with a countersink screw hole install in seconds, protect your doors and frames, and come in a box of 250 to keep you stocked for job after job. They’re the essential finishing touch for sheds, barns, and gates.